A robust instrument with special technical features.

- Easily check the angle of bore holes:
Lower a flashlight or torch facing up into the bore hole.  Point the NECLI towards the source of light and the actual angle of the bore hole can be checked on the scale.

- Determination of wall height
Wall height is triangulated from two points and calculated with the percentage scale on the instrument.

The NECLI Optical Hand Clinometer is suitable for fast and easy measurements, i.e. of vertical angles (rising and falling lines of sight), i.a. for the determination of heights of trees and buildings, for the determination of vertical angles and heights for the assembly and control of mobile and directional antennas, for the determination of wall heights and drill angles of bore holes in quarries, forestry surveys, measurement of longitudinal and transversal profiles and for the reduction of inclined distances to the horizontal.

Vertical circle oscillating in precision ball bearings with 4 graduations: 400g, % reduction scale, 360°; insensitive to wind due to closed housing; fast and precise reading of the scales due to the very efficient liquid damping.

Accuracy: +/- 0,2°
No. 3086    incl. case

Aluminum spirit level for inclination measurements.  Large (120mm) rotating scale and break-proof bubble level.  Scale for acclivity and inclination. Comes with magnet for easier positioning.
Length: 50cm
With carrying case.
No. 3081
 

Spirit level with rotating bubble.  Break-proof in convenient pocket size, with two bubble levels.  Horizontal bubble level is mounted in fixed position, the vertical bubble level can be locked in any position.  End points facilitate marking 45, 60, and 120 degree angles.  With magnet for easier positioning.
Dimensions: 250x54x15mm
No. 3179
 

Gold anodized aluminum casing, 60cm, with magnet.
Bubble level can be electronically aligned and are manufactured from break-proof acrylic glass. Horizontal bubble with magnifying function.
"Hold" function for displayed values.
Optional audible signal for 0° and 90° angles.
Automatic switch-off and reversible display (inverted readings).
Shock-absorbent end caps.
Accuracy:
Standard position: 0.3mm/m (0.017°)
Inverted measuring: 0.75mm/m (0.043°)
Solatronic module: 0.05° at 0° and 90°, 0.2 ° between 1 ° and 89°
With convenient carrying case.
No. 3084
 

Measure the angle of drilling tools or check angles during assembly work.  Aluminum casing.
The graduated circle is placed in precision ball bearings, magnetically damped and orients itself according to the force of gravity and may be read from the front as well as from above.  The scale is divided into 360 points.
Length: 30cm
Diameter of circle: 56mm
Interval: 1°
Sensitivity of level: 2’/2mm
Includes wooden case
No. 3085